Thermaltake blacx 5g driver
![thermaltake blacx 5g driver thermaltake blacx 5g driver](https://c1.neweggimages.com/ProductImageCompressAll1280/1B4-006X-00028-Z02.jpg)
I tested the Seagates and WDs separately, and then together (one Seagate and one WD in the drive at the same time) and the ejection issue only occurred when the WD was mounted. This didn't entirely solve my problem, although drops did seem less frequent.Īfter reading some forums about other mult-bay devices (nothing specifically directed at this dock was particularly helpful) I came across the topic of HDD and SATA controller instability with some HDDs. After some troubleshooting I updated the firmware on the dock, which can be found at. I had the same problems with both systems where the drives would randomly drop with "Disk not ejected properly." I was using it to swap between four 3.5" HDDs: Two 1TB Seagate Barracuda 7200.12 SATA II (c.2010), and Two 200 GB Western Digital WD2000 SATA I legacy drives (c.2004).
THERMALTAKE BLACX 5G DRIVER PRO
Otherwise it would be 5 stars.įirst of all, I used it on a 15" Retina MacBook Pro (Late 2013) and it's presently connected to my 27" iMac (Late 2013, refurbished).
![thermaltake blacx 5g driver thermaltake blacx 5g driver](https://c1.neweggimages.com/ProductImageCompressAll1280/17-153-066_R04.jpg)
The frustration is why it dropped 2 stars in my books. I'm giving it 3 stars because it was really frustrating and required considerable online research and troubleshooting before I found my fix. The results are just a mirror of each other.I had similar problems as those who rated this item at 1 star, but I found a solution for my system and now it seems to work fine. This benchmark is of the same physical drive that we ran the same benchmark at left in the BlacX 5G, but above is the results from the review of the drive when it was directly connected to the motherboard. We took the 2TB Seagate Barracuda Green drive and ran HDtune pro against it while sitting in the BlacX 5G and connected to USB 3.0, which resulted in some great scores.
![thermaltake blacx 5g driver thermaltake blacx 5g driver](https://c1.neweggimages.com/ProductImageCompressAll1280/1B4-006X-00028-Z06.jpg)
The results are spot on that there is no difference between direct connected to the motherboard or using the BlacX 5G as far as transfer speeds. That is a welcomed results which show that USB 3.0 is all it can be and the Blacx 5G is transferring the data at the same speed as a drive connected directly to a motherboard SATA ports.ĢTB Seagate Barracuda Green Drive ST2000DL003-9VT166 – benchmarked and compared to the benchmark from this drive’s review shown here. The results were simply impressive as the scores were spot on with the hard drives being connected internally. The drives we used have been reviewed and benchmarked with the drive connected to the motherboard of a system directly. Below we connected the BlacX 5G to our test system via USB 3.0 and ran a few benchmarks. This process is very stressful on any computer system, not to mention a time consuming and a real waste of energy.
THERMALTAKE BLACX 5G DRIVER PC
Without the BlacX Duet and BlacX 5G the process is to power down your PC connect a drive to your PC, and boot up and then do what you need to and then power down again to replace the drive with another. Keep in mind that the BlacX duet and the BlacX 5G are both meant to give the accessibility to take a SATA (None Hot-swap) hard drive and provide you with a way to swap out the multiple drives in a near hot swap speed. The USB 3.0 capability is a welcome addition when it comes to accessing and copying files on hard drives of 500MB or more.